Measurement Collection Specialists
Connect Any Gage into Any Software

 

MobileCollect Wireless Store


Most MobileCollect products and accessories can be purchased from this store.  We have listed the most common gage cables.  Please refer to the MobileCollect Selection Tool page for more information.

 

We offer free technical support and a money-back guarantee.  Product warranty information can be found on our Product Warranty page.

 

Listed below are quick links to the categories in this MobileCollect Wireless Store.

MobileCollect Wireless Store Categories


Mobile Modules (transmitters)

Product Photo P/N Description Price
Mini Mobile Module

MC-MM-M3 The Mini Mobile Module is used to capture measurements from most digital and RS-232 handheld gages such as calipers, micrometers, digital indicators, etc.

Note:  A gage cable is not included with this Mobile Module.  You must order the appropriate gage cable separately.  A few of the common Mini Mobile Module gage cables are listed below.  Refer to the MobileCollect Selection Tool page for additional information.

249.00

Command Mobile Module MC-MM-DC The Command Mobile Module functions the same as the Mini Mobile Module, with the additional ability to receive a command from a Base (receiver) to initiate a gage reading.

Note:  A gage cable is not included with this Mobile Module.  You must order the appropriate gage cable separately.  A few of the common Command Mobile Module gage cables are listed below.  Refer to the MobileCollect Selection Tool page for additional information.

349.00

RS-232 Mobile Module

MC-MM-V2 The RS-232 Mobile Module supports RS-232 gages not supported by the Mini and Command Mobile Modules.

Note:  A gage cable is not included with this Mobile Module.  You must order the appropriate gage cable separately.  A few of the common RS-232 Mobile Module gage cables are listed below.  Refer to the MobileCollect Selection Tool page for additional information.

349.00

Mini Mobile Module Gage Cables

These are the most common cables for the Mini Mobile Modules.  MobileCollect supports 1,000's of gages so please refer to the MobileCollect Selection Tool for additional cables.  If you need to purchase a new or replacement cable for an existing Mini Mobile Module, be sure to verify that you really want a cable for this Mobile Module.  The Mini Mobile Module uses a 2x3 connector as illustrated below.

Be sure to select the correct cable for your gage.  Several of the wireless gage cables cannot be returned if you purchase the incorrect cable.

  2x3 connector used by the Mini Mobile Module.
Mobile Modules
Supported
Photo P/N Description Price

Mini Mobile Module

MC-M3-54-115-333-X Simplex Opto cable used with gages from Brown & Sharpe, Fowler/Sylvac and Starrett.

This is a non-cancellable and non-returnable cable.

179.00

3.5" Cable

6.5" Cable

Mini Mobile Module

MC-M3-905338-X Cable for Mitutoyo gages that use the Mitutoyo 905338 cable.  There is no read button on this cable.

99.00

6.5" Cable

Mini Mobile Module MC-M3-959149-X Cable for Mitutoyo gages that use the Mitutoyo 959149 cable.  There is a read button on this cable.  This cable is used for several gages, including the current non-coolant proof calipers.

99.00

3.5" Cable

Mini Mobile Module MC-M3-05CZA624-X Coolant proof caliper cable for Mitutoyo gages that use the Mitutoyo 05CZA624 cable.  There is a read button on this cable.

This is a non-cancellable and non-returnable cable.

166.00

3.5" Cable

Mini Mobile Module MC-M3-05CZA662-X Coolant proof micrometer cable for Mitutoyo gages that use the Mitutoyo 05CZA662 cable.  There is a read button on this cable.

This is a non-cancellable and non-returnable cable.

137.00

6.5" Cable

Mini Mobile Module MC-M3-AA-963B-X Cable for Ono Sokki gages.

This is a non-cancellable and non-returnable cable.

119.00

6.5" Cable

Mini Mobile Module MC-M3-FED-MICRO-X Cable for Mahr Federal uMaxum gages.  This connector is a 7-pin male.  This cable does not work with the Mahr Federal uMaxum II gages

This is a non-cancellable and non-returnable cable.

148.50

6.5" Cable

Digital & Command Mobile Module Gage Cables

These are the most common cables for the Digital and Command Mobile Modules.  MobileCollect supports 1,000's of gages so please refer to the MobileCollect Selection Tool for additional cables.  If you need to purchase a new or replacement cable for an existing Digital or Command Mobile Module, be sure to verify that you really want a cable for this Mobile Module.  The Digital and Command Mobile Modules uses a 2x7 connector as illustrated below.

Be sure to select the correct cable for your gage.  Several of the wireless gage cables cannot be returned if you purchase the incorrect cable.

  2x7 connector used by the Digital and Command Mobile Modules.
Mobile Modules
Supported
Photo P/N Description Price

Digital Mobile Module
Command Mobile Module

MC-D-54-115-333-X Simplex Opto cable used with gages from Brown & Sharpe, Fowler/Sylvac and Starrett.

This cable works with the MobileCollect Digital and Command Mobile Modules.

This is a non-cancellable and non-returnable cable.

179.00

3.5" Cable

6.5" Cable

Digital Mobile Module
Command Mobile Module
Universal Mobile Module

MC-D-905338-X Cable for Mitutoyo gages that use the Mitutoyo 905338 cable.  There is no read button on this cable.

This cable works with the MobileCollect Digital and Command Mobile Modules, and the GageWay Wireless Universal Mobile Module.

99.00

6.5" Cable

Digital Mobile Module
Command Mobile Module
Universal Mobile Module
MC-D-959149-X Cable for Mitutoyo gages that use the Mitutoyo 959149 cable.  There is a read button on this cable.  This cable is used for several gages, including the current non-coolant proof caliper.

This cable works with the MobileCollect Digital and Command Mobile Modules, and the GageWay Wireless Universal Mobile Module.

99.00

3.5" Cable

Digital Mobile Module
Command Mobile Module
MC-D-AA-963B-X Cable for Ono Sokki gages.

This cable works with the MobileCollect Digital and Command Mobile Modules.

This is a non-cancellable and non-returnable cable.

119.00

6.5" Cable

Digital Mobile Module
Command Mobile Module
Universal Mobile Module
MC-D-FED-MICRO-X Cable for Mahr Federal uMaxum gages.  This connector is a 7-pin male.  This cable does not work with the Mahr Federal uMaxum II gages

This cable works with the MobileCollect Digital and Command Mobile Modules, and the GageWay Wireless Universal Mobile Module.

This is a non-cancellable and non-returnable cable.

148.50

6.5" Cable

 RS-232 Mobile Module Gage Cables

These are common cables for the RS-232 Mobile Module.  MobileCollect supports 1,000's of gages so please refer to the MobileCollect Selection Tool for additional cables.  If you need to purchase a new or replacement cable for an existing RS-232 Mobile Module, be sure to verify that you really want a cable for this Mobile Module.  The RS-232 Mobile Module uses a 2x6 connector as illustrated below.

Be sure to select the correct cable for your gage.  Several of the wireless gage cables cannot be returned if you purchase the incorrect cable.

  2x6 connector used by the RS-232 Mobile Module.
Mobile Modules
Supported
Photo P/N Description Price
RS-232 Mobile Module MC-V2-54-115-527-X Proximity cable for Sylvac, Fowler and Starrett gages.  These gages include calipers, micrometers, etc.  Due to the voltage level requirements of this cable, this cable can only be used with the RS-232 Mobile Module.

This is a non-cancellable and non-returnable cable.

189.50

6.5" Cable

RS-232 Mobile Module MC-V2-DB9M-S-T3-R2-X Cable for serial devices that have a DB9 female connector that is configured for connecting directly to a PC.  Pins connected on Mobile Module cable are RxD (pin 2), TxD (pin 3) and Ground (pin 5).

99.00

6.5" Cable

Remotes (transmitters)

Product Photo P/N Description Price

Digital Remote

MC-DIG-REMOTE The Digital Remote is used when you have a digital gage (gage with Mitutoyo compatible output, Ono Sokki, Federal Maximum or INSIZE indicator) in a non-mobile setup that you want to connect to the wireless system.

Includes setup program on CD, 6' USB cable, and USB AC adapter for North America.

Range up to 133 feet.

395.00

MC-DIG-REMOTE-NAC Digital as described above, but does not include the USB AC adapter.

In order to use this Remote, you will need to supply your own AC adapter or purchase one of the USB AC adapters shown below.

390.00

RS-232 Remote

MC-RS232-REMOTE The RS-232 Remote is used when you have an RS-232 serial device, such as a gage interface or a scale, in a non-mobile setup that you want to connect to the wireless system.

Includes setup program on CD, 6' USB cable, and USB AC adapter for North America.

Range up to 133 feet.

395.00

MC-RS232-REMOTE-NAC RS-232 Remote as described above, but does not include the USB AC adapter.

In order to use this Remote, you will need to supply your own AC adapter or purchase one of the USB AC adapters shown below.

390.00

Specs for the Bases can be found on the Specifications page.  Please contact us if you need an RS-232 Remote with a range of 300 feet.

Bases (receivers)

Product Photo P/N Description Price
USB Base

MC-BASE-USB The USB Base receives measurements from Mobile Modules and Remotes.  Connects directly to and is powered by USB port on a PC or a laptop.

Includes Setup Programs on CD and a 72" USB cable.

Range up to 133 feet.

395.00

RS-232/USB Base

MC-RS232-BASE The RS-232/USB Base can be connected to an RS-232 or USB port and receives measurements from Mobile Modules and Remotes.  This Base is identical to the MC-BASE-USB Base but also contains a DB9 serial port in addition to a USB port.

Includes Setup Programs on CD, 6' DB9 serial cable for connecting to standard 9-pin serial port on a PC, 6' USB cable and USB AC adapter for North America (required when connecting to a DB-9 serial port).

Range up to 133 feet.

415.00

MC-RS232-BASE-NAC RS-232 Base as described above, but does not include an AC adapter.

If your are going to use the DB9 serial port on this Base, you will need to supply your own AC adapter or purchase one of the USB AC adapters shown below.

410.00

USB MicroBase

MC-MICROBASE-USB The USB MicroBase receives measurements from Mobile Modules and Remotes.  Connects directly to and is powered by USB port on a PC, laptop or tablet computer.

Includes Setup Programs on CD.

Go to the USB & RS-232 Cables Store for information about special USB cables that may be useful for connecting the USB MicroBase to a computer.

Range up to 133 feet.

395.00

Specs for the Bases can be found on the Specifications page.

Foot & Hand Switches
Foot and hand switches are available for use with MobileCollect Bases and Remotes.  Foot and hand switches can be used to tell the Base or Remote to send a command.  Most wireless installations do not require the use of foot or hand switches.

Product Photo Part No.

Description

Price
Foot Switch FTSW-MPLG Foot switch with 6' cable terminated with 2.5 mm subminiature phone plug.

69.00

Hand Switch HNDSW-MPLG Handheld remote read switch with 6' cable terminated with 2.5 mm subminiature phone plug.

69.00

Power Options for RS-232 Bases and Remotes
These AC adapters have a connector for a USB cable and supply an output of 5 VDC at 1 amp.

Product Photo Part No. Description Price

North America
USB AC Adapter

ADT-USB-NA Type A:  AC adapter mainly used in the USA, Canada, Mexico & Japan.

25.00

Australia USB
AC Adapter

ADT-USB-AU Type I:  AC adapter mainly used in Australia, New Zealand, China & Argentina.

25.00

Europe USB
AC Adapter

ADT-USB-EU Type C:  AC adapter mainly used in Europe, South America, Asia, Russia & South Korea.

25.00

United Kingdom
USB AC Adapter

ADT-USB-UK Type G:  AC adapter mainly used in the United Kingdom, Ireland, Malta, Malaysia & Singapore.

25.00

Accessories & Spare Parts for MobileCollect Bases & Remotes with the ATZB Radio Module
The ATZB Radio Module was replaced with the MicroRidge developed RM2.4 Radio Module in early 2016.  Bases and remotes with the new RM2.4 Radio Module have the logo on the product label.

Product Photo P/N Description Price
Serial to USB
Interface Cable
USB-1SP-6 6' serial to USB interface cable.

35.00

International
AC Adapter
ADT-GW-INT International AC adapter with 4 power plug adapters.  Can be used with 100-240 VAC and 47-63 Hz power supply systems.  For use with the GageWay Series and MobileCollect RS-232 Base and Remote.

NOTE! Limited quantity available

53.00

North America
AC Adapter
ADT-9-500P North America AC adapter (9 VDC @ 500 ma w/3.5 mm phone plug) for use with the GageWay Series and MobileCollect RS-232 Base and Remote.

25.00

All prices in US dollars and subject to change without notice.
Revised June 15, 2017.


 

Home  |  MobileCollect Wireless  |  GageWay Interfaces  |  WedgeLink Keyboard Wedges
MobileCollect Store  |  GageWay Store  |  Gage Cables Store  |  WedgeLink Store  |  USB & RS-232 Cables Store

 Copyright 2017 MicroRidge Systems, Inc.
All Rights Reserved.

Revised June 19, 2017