Designed & Made in the USA
Product label has RM2.4 Logo as seen below & No EVO Marking
Products | Firmware Version | Release Date | Comments | |
|---|---|---|---|---|
Serial Bases | USB MC-BASE-USB | 5.62 | 12/20/2024 | What’s New: Support for new pre-defined output format added to Xpress Setup. (Module ID, Measurement, Channel). Supports CDI Indicators containing embedded RM2.4 Module Supports RM2.4 Radio Module Mitutoyo U-Wave Transmitters |
RS-232/USB MC-BASE-RS232 | ||||
MicroBase MC-BASE-MICRO | ||||
Keyboard Wedge Bases | Wedge/USB MC-BASE-KW | |||
Wedge Processor | 1.16 | This firmware is used for updating the Wedge Processor in a Keyboard Wedge/USB Base. The update is done via a USB cable connected between the USB port labeled Serial on the Wedge/USB Base. | ||
Products | Firmware Version | Release Date | Comments |
|---|---|---|---|
Mini Mobile Module MC-MM-M3 | 5.38 | 12/20/2024 | What’s New: Support for a new gage type “Remote Read Switch” which sends a read all command to Command Mobile Modules via an RM2.4 EVO Base. |
Command Mobile Module MC-MM-DC | 5.36 | 12/20/2024 | What’s New: Support for Absolute Value of gage reading. |
RS-232 V2 Mobile Module MC-MM-V2 |
How to update the firmware in a Mobile Module.Â
Products | Firmware Version | Release Date | Comments |
|---|---|---|---|
RS-232 MC-REM-RS232 | 5.21 | 10/20/2023 | What’s New: Support for a Mitutoyo Digimatic D2 high resolution output format. |
Digital MC-REM-DIG |
Products | Firmware Version | Release Date | Comments |
|---|---|---|---|
CORE | 5.28 | 8/20/2020 | This firmware is used for CDI CORE and VRS Indicators that contain an embedded RM2.4 Radio Module. The update is done via a wireless link from a MobileCollect Base. Refer to Using CDI Indicator with MobileCollect for accessing the Radio Menu on the CDI Indicator. This gage is also sold under several private label brands. |
VRS |
This firmware is used for MobileCollect products that contain the ATZB Radio Module. Unlike the MobileCollect products that contain the RM2.4 Radio Module, there is no special logos on the product label for the ATZB based products. These products were discontinued at various times between February 2016 and February 2018. This firmware is provided to customers using older versions so they can maintain their systems.
Products | Firmware Version | Release Date | Comments |
|---|---|---|---|
USB | 5.38 | 6/27/2022 | This firmware is used for Bases that contain the ATZB Radio Module. The update is done via a USB cable connected to a PC. |
RS-232 / USB | |||
MicroBase |
Products | Firmware Version | Release Date | Comments |
|---|---|---|---|
Mini | 4.10 | 4/18/2019 | This firmware is used for updating any of the Mobile Modules that contain the ATZB Radio Module. The update is done via a wireless link from a MobileCollect Base. |
Command | |||
RS-232 V2 |
Products | Firmware Version | Release Date | Comments |
|---|---|---|---|
RS-232 | 4.11 | 9/30/2022 | This firmware is used for updating Digital Remotes that contain the ATZB Radio Module. The update is done via a DB9 serial cable connected to a PC. |
Copyright 2025 MicroRidge
