MobileCollect Wireless Mini Mobile Module

Mini Mobile Module (M3)

SKU MC-MM-M3 Category Mini Mobile Module Tag mobile_module

The Mini Mobile Module is used to capture measurements from most digital and RS-232 handheld gages such as calipers, micrometers, digital indicators, etc.

Securely attaches to all handheld gages.
Works with gages from numerous metrology brands including Mitutoyo, Starrett, Mahr Federal and many more.
LEDs positioned to provide highly visible user feedback.
User replaceable gage cable.
Range up to 133 feet.
Battery life in excess of 500,000 readings.
Field upgradeable firmware.
Automatically turns itself off after each reading. No power switch required.
Read button is rated for 1 million cycles.
Gage cable in lengths up to 72″.

Note: A gage cable is not included with this Mobile Module. You must order the appropriate gage cable separately. Refer to the MobileCollect Selection Tool page for additional information.

$280.00

Check Out

Mini Mobile Module (M3) Connectors

Below are the compatible connectors for the Mini Mobile Module. These connectors can be replaced in the field.

Below is the 2×3 connector used by the Mini Mobile Module.

Gage Brand for Connector

Don’t see your brand? Chances are we can support it. Reach out to sales@microridge.com or check out the MobileCollect Selection Tool.

M3 Connector – Mahr Federal Gage Cable
$230.00 Add to cart
M3 Connector – Mahr Federal Caliper & Depth Gage
$225.00 Select options This product has multiple variants. The options may be chosen on the product page
M3 Connector – Mahr Federal µMaxum Gage
$155.00 Add to cart

Don’t see the connector you need? MobileCollect supports over 3500 gages, reach out to sales@microridge.com and we’ll figure out what need.

M3 Connector – Ono Sokki Digital Indicator Connector
$125.00 Add to cart
M3 Connector – Kroeplin Gage & Interface Adapter
$290.00 Add to cart
Sale!
M3 Connector – Fowler/Sylvac Simplex Opto | 54-115-333
$175.00 – $205.00 Select options This product has multiple variants. The options may be chosen on the product page
M3 Connector – TruPosition Gage Cable
$190.00 Add to cart
M3 Connector – CDI Logic IQ & Logic ALG
$145.00 Add to cart

Accessories

Replace Mini Mobile Module cable

How to replace a Mini Mobile Module Cable.

Remove Battery Mini Mobile Module

Short video taking you through removing battery from the Mini Mobile Module.

Mobile Module Restricted Mode Firmware 5.14 and Earlier

How to identify and turn off “Restricted Mode” on a Mobile Module transmitter. Firmware 5.14 and earlier.

Mobile Module Restricted Mode Firmware 5.15 and Later

How to identify and turn off “Restricted Mode” on a Mobile Module transmitter. Firmware 5.15 and later.

Mobile Module Firmware Updating

How to update the firmware in a Mobile Module.

Mobile Module Association/Pairing to Base Receiver

On-The-Fly Association Method

A quick way to link one or more Mobile Module transmitters to a Base receiver.

Associate Mobile Module using Xpress Setup

Guides you through the basic installation of MobileCollect using Xpress Setup.

Associate Mobile Module using Extended Setup

Guides you through the basic installation of MobileCollect wireless using Extended Setup.

MobileCollect in Action

Are you collecting measurements manually? See how MobileCollect wireless can collect measurements in real time with 100% accuracy with the press of a button.

MobileCollect in Action on Quality Digest Live Tech Corner

See MobileCollect wireless in action! A good overview of MobileCollect highlighting the Mini Mobile Module and USB MicroBase.

Ray’s Perfect Solution

Ray had a quality problem. Watch our short video to see how Ray solved that problem with MobileCollect Wireless.

Automate Your Measurement Collection

What is the best way to record your measurements from a caliper, lab scale or other device to track quality or produce a report? Watch our short video to learn more.

MobileCollect Demo Kit Overview

An overview for the MicroRidge MobileCollect Demo Kit. A quick start guide to get your demo kit up and running.

FAQ Checklist – MobileCollect Wireless

The most frequently asked questions about MobileCollect Wireless.

Download

Install or Replace Mini Mobile Module Cable

How to install or replace a Mini Mobile Module gage cable.

Download

Mini Mobile Module Spec Sheet

MC-MM-M3 Spec Sheet

Download

Mobile Module Setup Button Restricted Mode Ver 5.14 & Later

MobileCollect Mobile Module setup button restricted mode of operation procedures for version 5.14 or later.

Download

MobileCollect Brochure

MobileCollect Wireless the process of transferring measurement data simplifies from a gage to your SPC/DAQ …

Download

MobileCollect Hardware Components Users Guide

MobileCollect is a wireless data collection system designed for use on the factory floor, in …

Download

MobileCollect Overview

MobileCollect transmits measurements wirelessly from any gaging device with a supported SPC data port into …

Download

MobileCollect Quick Start Users Guide

Want to quickly get started using MobileCollect? The steps shown in this document should get …

Download

MobileCollect Wireless Mobile Module Transmitters

Mobile Module transmitters are for “mobile” gage devices such as calipers and micrometers.

Download

Ordering Mobile Module Transmitters and Cables

There are three Mobile Module transmitters and dozens of cables.

Download

Transmitter to Receiver Ratio

How many transmitters can link to a single receiver?

Download

MobileCollect Software

Several different software programs can be used to support the set up and use of MobileCollect. These programs are described below. Copies of the User’s Guides and the software are available in the links below. You can install these programs on as many computers as required. All of these programs have been tested on Windows XP, Windows 7, Windows 8, Windows 10 and Windows 11. All of the programs shown below are included on the MobileCollect CD that is shipped with MobileCollect.

Firmware Updates

We’re always making improvements. MobileCollect devices can be updated in the field with the latest and greatest.

Questions & Answers

How do I attach the Transmitter to a gage?

0 votes

Q How do I attach the Transmitter to a gage?

A All Mobile Module Transmitters come with 2 strips of 3M Dual Lock that allows the Transmitters to be semi-permanently installed on your preferred location on the gage.

Will this connect with the Mitutoyo 500-171-30 caliper?

0 votes

Q Will this connect with the Mitutoyo 500-171-30 caliper?

A Yes, you can connect the Mitutoyo 500-171-30 caliper to a Mini Mobile Module. You'll need the MC-M3-959149-3.5 M3 (Mini Mobile Module) Connector to go along with the Mini Mobile Module. You can always look up gages in the MobileCollect Selection Tool, it features over 3,500 gages from various brands.

I have a gage that has the ability of doing TIR mode, will the Mini Mobile work with this?

0 votes

Q I have a gage that has the ability of doing TIR mode, will the Mini Mobile work with this?

A
Yes, the Mini Mobile Module will work with your gage while it’s in TIR (Total Indicator Reading / Total Indicator Runout) mode. To take it a step further, the Mini Mobile Module can be setup to do the TIR calculations if your gage does not have TIR mode built in.

Designed & Made in the USA

MobileCollect

Wireless Gage Interfaces

GageWay

Wired Gage Interfaces

WedgeLink

RS-232 Keyboard Wedges

Resources

Support

Gage Integration

Resources

Support

Resources

Support

Try Before you Buy!

ComTestSerial

Document Library

Mini Mobile Module (M3)

Mini Mobile Module (M3) Connectors

Gage Brand for Connector

M3 Connector – Mitutoyo 905691

M3 Connector – Mitutoyo 06AGL111

M3 Connector – Mitutoyo 06AGL011

M3 Connector – Mitutoyo 959149

M3 Connector – Mitutoyo 2×3 Connector

M3 Connector – Mitutoyo 2×5 Connector Cable

M3 Connector – Mitutoyo 905338

M3 Connector – Mitutoyo 21EAA194

M3 Connector – Mitutoyo 05CZA662

M3 Connector – Mitutoyo 05CZA624

Accessories

Foot Switch

Hand Switch

Replace Mini Mobile Module cable

Remove Battery Mini Mobile Module

Mobile Module Restricted Mode Firmware 5.14 and Earlier

Mobile Module Restricted Mode Firmware 5.15 and Later​

Mobile Module Firmware Updating

MicroRidge Systems, Inc.

Mobile Module Restricted Mode Firmware 5.15 and Later