Starrett electronic gages with output use several different connectors, depending on the tool family and its age. The 2900 indicators, the 2700 indicators, the 733 and 795.1 micrometers and the older 721 and 723 calipers each take their own cable. This page shows which MicroRidge connector fits each Starrett model in the System Builder, and which models have no output.
Find your Starrett gage in the builderOr describe your application to the System Advisor
Counts come from the MicroRidge Measurement Collection System Builder and update when the gage data does.
Starrett connections
- 2900 series indicators. Starrett says every 2900 indicator has data output. MicroRidge’s 2900SCM connector is made to order for these indicators, sealed to IP67 at the gage, with a data button.
- 2700 series indicators. These connect with the same cable as Chicago Dial Indicator Logic gages (G-LP-MIT), which plugs straight into a GageWay or a Digital Remote.
- Micrometers and older calipers. The 733.1 and IP67 795.1 micrometers use the 795.1 connector. The 721 and 723 calipers, the 733 with SPC port and non-IP67 795.1 models use the PT22938 connector, named for the Starrett cable that fits the same port.
- Opto, proximity and RS-232 models. A few Starrett calipers, bore gages and instruments use the same opto and proximity ports as Fowler and Sylvac gages, or a DB9 serial port. The table shows each one.
| Gage connection | Models | Wireless (MobileCollect) | Wired (GageWay) |
|---|---|---|---|
| 2900SCM Series 2900 | 36 |
|
|
| CDI-LP-MIT Series 2700, 2730, 2720 | 32 |
| |
| PT22938 Series 3752, 2000 | 27 |
|
|
| 795.1 | 15 |
|
|
| RS-232, Starrett output jack Series 749BZ | 12 | Ask MicroRidge | Not offered |
| Ask MicroRidge | 9 | Ask MicroRidge | Not offered |
| 54-115-527 | 8 |
| |
| 54-115-333 | 7 |
| |
| RS-232, DB9 female | 3 |
|
|
| RS-232, 4-pin Series 3754 | 2 | Ask MicroRidge | Not offered |
| RS-232, Starrett RS232 output port | 2 | Ask MicroRidge | Not offered |
| 54-115-444 | 2 |
|
9 more connections are used by 10 other models: 62680, RS-232, Starrett output connection, RS-232, DB9 male, RS-232, Starrett output port, RS-232, Micro DB9 female, RS-232, USB / Micro DB9, RS-232, USB / RS-232, EC799B, RS-232, DB25 female. The builder has the parts for each.
Prices are U.S. list. The builder adds the base receiver or GageWay interface for your computer and checks each model.
Check for output before you buy
Starrett sells several electronic tools with and without output. Among calipers, the 798B and EC799B models have output, while the 798A, EC799A and 799AZ do not. The 796.1 micrometer has no output. Models without output in the builder are listed at the bottom of this page.
MobileCollect or DataSure
Starrett’s DataSure 4.0 system collects from Starrett’s wireless W-series tools and from cabled tools through end nodes. MobileCollect is the option when one system has to cover Starrett alongside Mitutoyo, Mahr, Fowler and RS-232 instruments, with long range on a single coin cell battery. The wireless white paper compares DataSure 4.0 and MobileCollect side by side.
For fixed stations, the 2700 cable and Starrett’s RS-232 instruments connect to a GageWay interface, and the Digital Remote covers 2700 indicators on stands away from the computer.
Starrett series in the builder
Indicators 71
| Series | Gage types | Models | Connection |
|---|---|---|---|
| 2900 | 2900 Series Indicator | 35 | 2900SCM |
| Other | 2700 Series Indicator, Indicator series, Electronic Indicator | 20 | CDI-LP-MIT, PT22938, 2900SCM; 1 without data output |
| 2700 | 2700 Series Indicator | 7 | CDI-LP-MIT |
| 2730 | 2700 Series Indicator | 5 | CDI-LP-MIT |
| 2720 | 2700 Series Indicator | 2 | CDI-LP-MIT |
| 3600 | Electronic Indicator | 1 | 1 without data output |
| 3600M | Electronic Indicator | 1 | 1 without data output |
Micrometers 52
| Series | Gage types | Models | Connection |
|---|---|---|---|
| Other | Micrometer, Micrometer Head, Bench Micrometer | 52 | 795.1, PT22938, RS-232, Starrett output jack; 4 without data output |
Calipers 12
| Series | Gage types | Models | Connection |
|---|---|---|---|
| Other | Caliper, Caliper series, Caliper slide IP66 | 12 | 54-115-333, PT22938, 54-115-527; 2 without data output |
Height gages 12
| Series | Gage types | Models | Connection |
|---|---|---|---|
| Other | Height gage | 8 | PT22938, RS-232, Starrett output port; 1 without data output |
| 3752 | Height gage | 2 | PT22938 |
| 2000 | Height gage (4 pin output) | 1 | PT22938 |
| 3754 | Height Gage | 1 | RS-232, 4-pin |
Depth gages 9
| Series | Gage types | Models | Connection |
|---|---|---|---|
| Other | Depth gage, Depth Micrometer | 7 | PT22938, RS-232, Starrett output jack, 795.1; 1 without data output |
| 749BZ | Depth Micrometer | 2 | RS-232, Starrett output jack |
Bore gages 9
| Series | Gage types | Models | Connection |
|---|---|---|---|
| Other | AccuBore, Bore Gage, AccuBore - Bluetooth model | 9 | 54-115-527, 54-115-444, 54-115-333 |
Displays and counters 5
| Series | Gage types | Models | Connection |
|---|---|---|---|
| Other | Gage Chek, Gage-Chek, Quadra-Chek | 5 | RS-232, DB9 female, RS-232, DB9 male, RS-232, DB25 female |
Hardness and surface testers 4
| Series | Gage types | Models | Connection |
|---|---|---|---|
| Other | Hardness Tester | 4 | RS-232, USB; 2 without data output |
Force and torque gages 4
| Series | Gage types | Models | Connection |
|---|---|---|---|
| Other | Digital Force Gage | 4 | RS-232, Micro DB9 female, RS-232, USB / Micro DB9, RS-232, USB / RS-232 |
Scales and balances 2
| Series | Gage types | Models | Connection |
|---|---|---|---|
| Other | Linear Scale, Machine scale | 2 | PT22938 |
Other gages 1
| Series | Gage types | Models | Connection |
|---|---|---|---|
| Other | Snap Gage | 1 | 1 without data output |
Questions
The 2900SCM connector is built to fit the 2900’s sealed data port, so it is assembled for each order and cannot be returned. Check your model in the builder before ordering. Yes. One MobileCollect base takes readings from every transmitter, and a GageWay Pro reads gages from different makers side by side. Only the connector on each gage changes. Search the model number in the System Builder. It lists the connector, transmitter and base, or tells you the model has no output.Why is the Starrett 2900 connector made to order?
Can Starrett gages share a system with Mitutoyo gages?
How do I find the right connector for my Starrett gage?
Every Starrett model in the builder
Select a model to open it in the System Builder with the transmitter, cable and base.
Indicators
Other: 2600, 2700 (CDI), 2720AD, 2720ADM, 2720IQM, 2730AD, 2730ADM, 2730IQ, 2730IQM, 2740AD, 2740ADM, 2740IQ, 2740IQM, 2750AD, 2750ADM, 2750IQ, 2750IQM, 2900, 910149A
2700 series: 2700-800, 2700-801, 2700-802, 2700-803, 2700-804, 2700-805, 2700-806
2720 series: 2720-1AD, 2720-1ADM
2730 series: 2730-1AD, 2730-1ADM, 2730-1IQ, 2730-1IQM, 2730-3
2900 series: 2900-1, 2900-1-1, 2900-1-2, 2900-1M, 2900-1M-25, 2900-1M-50, 2900-1ME, 2900-1ME-25, 2900-1ME-50, 2900-2, 2900-2-1, 2900-3-1, 2900-3M-25, 2900-3ME-25, 2900-4, 2900-4-1, 2900-4-2, 2900-4M, 2900-4M-25, 2900-4M-50, 2900-4ME, 2900-4ME-25, 2900-4ME-50, 2900-5-1, 2900-5M-25, 2900-5ME-25, 2900-6, 2900-6-1, 2900-6-2, 2900-6M, 2900-6M-25, 2900-6M-50, 2900-6ME, 2900-6ME-25, 2900-6ME-50
Micrometers
Other: 7xx series, 714 / 714M, 731, 733 (with SPC port), 733.1 MEXFLZ, 733.1 MXRL, 733.1 series, 733.1 XFL-1, 733.1 XFLZ, 733MEXFLZ-X, 733MXRL, 733XFLZ-X, 756, 756.1, 760, 760.1, 762, 762.1, 762MEXFL-25, 762MEXFL-50, 762NXRL, 762XFL, 762XFL-2, 764, 764.1, 769, 769.1, 770 XTZ, 777, 777.1, 777MEXFLZ, 777XFLZ, 780 XT, 782, 786.1, 786P, 788, 788.1, 790 / 790M, 790.1, 795 MEXFL, 795 XFL, 795.1 MEXRL, 795.1 MXRL, 795.1 XFL, 795MEXFL-25, 795XFL-1, 795XRL-1
Height gages
Other: 751, 752, 752 A, 753, 755, 3752, 3754 series
2000 series: 2000-24 Altissimo
3752 series: 3752-12/300, 3752-24/600
3754 series: 3754-12/300 and 3754-24/600
Calipers
Other: 721, 723, 797B, 798B, 799B, 5000 series, 5001 series, 5002 series, 5004 series, EC799B
Bore gages
Other: 780 XTZ-138, 781, 781 BXTP, 781 BXTZ, 781 XTP, 781 XTZ, 781XT, 784, 789
Depth gages
Other: 749, 749 BZ, 749.1, 749MEBZ-150, 749MEBZ-300, 3753B series
749BZ series: 749BZ-6RL, 749BZ-12RL
Displays and counters
Other: 776, 776A - 776E, QC 200, QC200, QC2000
Force and torque gages
Other: DFC series, DFG Series, DFG series (USB / Micro DB9), DFG series (USB / RS-232)
Scales and balances
Hardness and surface testers without data output: 381X, 3825. These models have no data output, so no cable or transmitter can read them.
Hardness and surface testers that are not compatible: 382X, 383X. These models have no output a MicroRidge interface can read, such as USB-only or Bluetooth-only.
Micrometers without data output: 734, 796, 796 XFL, 796 XRL. These models have no data output, so no cable or transmitter can read them.
Other gages without data output: 765. These models have no data output, so no cable or transmitter can read them.
Calipers without data output: 798A, 799A. These models have no data output, so no cable or transmitter can read them.
Indicators without data output: 3600-5, 3600M-5, 3732 Series. These models have no data output, so no cable or transmitter can read them.
Height gages without data output: 3751. These models have no data output, so no cable or transmitter can read them.
Depth gages without data output: 3753A series. These models have no data output, so no cable or transmitter can read them.
